alloy steel chain hoisting slings
"
Paranco manuale a leva a cricchetto da 0,75 tonnellate EN 13157
Lever Block Chain 0.75 Tonne Manual Lever Chain Hoist Ratchet Lever Hoist Product Description Main features: - Meets all pertinent world standards - All steel construction for external impact resistance - High-strength, cold-formed, stamped steel construction makes it lighter in weight yet impact resistant for longer life - 360○ degree handle rotation with short stroke to ratchet loads - Durable baked enamel paint protection - Reliable non-asbestos disc brake - Every lever
Appoggi di testa rotondi della lega di alluminio dell'en 573-3
TALURIT® Round Aluminium End Stops made of Aluminium alloy not used for lifting Product Description Ends stops (R) are not allowed to use for lifting applications. The expected strength regarding this end-termination is approximately 50% of the MBL of the wire rope (informative only). Accordingly, verifying tests must be performed to secure the strength of the application. Art. No: R 01,5 – R 32 The R end stop is a round end stop made of Aluminium alloy, AW-5051A, same as for
Imbracatura della fune metallica di conduttore elettrico 4 di DNV 2.7-1
20 tonne DNV 2.7-1 Offshore Container Lifting Sling, four-leg swaged wire rope sling, sling assembly, lifting set DNV 2.7-1 Offshore Container Lifting Sling Set All of our DNV 2.7-1 Offshore Container Lifting Slings are produced according to our DNV Quality management approved system. When DNV revised the DNV 2.7-1 Certification Note, the most extensive changes were made in the lifting sling requirements. The sling is a four or five legged wire rope lifting sling fitted with
8 Assemblea di imbracatura del cavo metallico di tonnellata DNV 2.7-1, imbracatura della fune metallica di conduttore elettrico 4
8 tonne DNV 2.7-1 Offshore Container Lifting Sling, four-leg swaged wire rope sling, sling assembly, lifting set DNV 2.7-1 Offshore Container Lifting Sling Set Offshore Container are mainly used on offshore oil platforms. They are much different with normal ISO container. Not only because strict safety requirements have to be met, but also because they are mainly transported by small ship and lifted / unloaded by crane. When DNV revised the DNV 2.7-1 Certification Note, the
Assemblea di imbracatura del cavo metallico da 12 tonnellate
12 tonne DNV 2.7-1 Offshore Container Lifting Sling, four-leg swaged wire rope sling, sling assembly, lifting set DNV 2.7-1 Offshore Container Lifting Sling Set When DNV revised the DNV 2.7-1 Certification Note, the most extensive changes were made in the lifting sling requirements. The sling is a four or five legged wire rope lifting sling fitted with a quad assembly and shackles. Each component of the lifting sling is specified to the capacity of the container. The sling is
Arresto terminale rotondo del cavo metallico della lega di alluminio 3,1 puntali T/TKH
TALURIT® Round Aluminium End Stops made of Aluminium alloy not used for lifting MATCHING WIRE ROPE TO FERRULE Selection of the correct ferrule is to take account of: -The measured rope diameter -The rope type (and core) -The nominal fill factor, f (or metallic cross-sectional area factor, C) of the rope. Very important for fibre core ropes! Case 1 For single layer round strand ropes with fibre core and cable-laid ropes having a fill factor of at least 0,36 (C≥0,283) and max 0
Boccole in lega di alluminio 3.1 T e TKH EN 13411-3
3.1 T AND TKH FERRULES EUROPEAN STANDARD SYSTEM – EN 13411-3 Product Description Version:0.9 StartHTML:0000000105 EndHTML:0000005414 StartFragment:0000000141 EndFragment:0000005374 Case 1 For single layer round strand ropes with fi bre core and cable laid ropes having a fi lling factor greater than 0,45 (C>0,353) and for single layer round strand ropes with metallic core and for rotation-resistant round strand ropes having a fi ll factor up to 0,62 (C≤0,487), a fer rule
Bene durevole senza fine resistente alla corrosione dell'imbracatura del cavo metallico flessibile per il sollevamento resistente
Product Description: Endless Wire Rope Sling is a versatile lifting and rigging component designed for heavy-duty applications. It is made from high-grade steel wires which provide superior strength, flexibility and durability. The rope is corrosion resistant, abrasion resistant and comes in a variety of colors, weights, and lengths to suit individual needs. The rope is designed to offer maximum safety and reliability when used in demanding applications. Its endless
Hardware e accessori per imbracature premium – Soluzioni di sollevamento per impieghi gravosi di Anfeng
When it comes to secure, high-performance lifting and rigging, Anfeng Lifting & Rigging Ltd. delivers industrial-grade sling hardware designed for maximum strength, safety, and durability. Our carbon steel shackles and alloy steel pins are engineered to handle extreme loads while resisting corrosion, making them ideal for construction, marine, logistics, and heavy industry applications. Key Features & Competitive Advantages ✔ Unmatched Strength & Durability High-grade carbon
