galvanized steel wire rope slings
"
La mano del centro della fibra ha impiombato l'Assemblea di imbracatura del cavo metallico ha galvanizzato il materiale d'acciaio
Hand Spliced Wire Rope Sling (Fibre Core) Product Description A Hand Spliced Wire Rope Sling is constructed when the end of a single-part wire rope is bent back along the rope to create a looped eye shape, and strands at the end of this eye are then tucked back inside the body of the rope by hand. The eye shape helps to create a sling that can be used for a variety of applications. Hand-spliced ropes can be complete without the need for a thimble, while they often being
Assemblea di imbracatura del cavo metallico dell'en 13411-4 70mm, breve incavo dell'arco di 5:1
70mm Wire Rope Sling with Short Bow Socket, Closed Spelter Socket Sling, long-term durability Wire Rope Sling and Wire Rope End Fittings Product Description Short Bow Socket is a closed spelter socket. The socket is made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term durability. Our Short Bow Socket meets RR-S-550D (type B) requirements and is
1-5/8» l'Assemblea di imbracatura del cavo metallico, 5:1 chiuso foggia l'incavo con uno stampo
1-5/8" Wire Rope Sling with Closed Spelter Socket, long-term durability Wire Rope Sling and Wire Rope End Fittings Description Closed spelter socket is a common type of socket. It has a hole that is made for a pin or bolt. Closed and open spelter socket also named as poured socket. Our Closed Spelter Socket is made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization
Assemblea di imbracatura del cavo metallico di 50mm con l'incavo aperto di Spelter
50mm Wire Rope Sling with Open Spelter Socket (with cotter pin), long-term durability Wire Rope Sling and Wire Rope End Fittings Description Our Open Spelter Socket is equipped with cotter pin. They are made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term durability. This type of end fittings for wire rope sling is made depending on the specific
Assemblea di imbracatura del cavo metallico di 5:1 90mm, incavo aperto dell'en 13411-4 Spelter
90mm Wire Rope Sling with Open Spelter Socket, long-term durability Wire Rope Sling and Wire Rope End Fittings Product Description The open design spelter socket is attached to the end of a wire rope cable by pouring zinc or resin to create the termination. This hardens to hold the socket into place. This type of wire rope slings are used in many wire rope and structural strand termination applications where a high strength, permanent end attachment is required. They are
Assemblea di imbracatura del cavo metallico di 12mm, imbracatura del cavo metallico impiombata mano
12mm Hand Spliced Wire Rope Sling, steel core, can be equipped with Thimble Standard Eye and Thimble Eye Wire Rope Sling, steel core Product Description A Hand Spliced Wire Rope Sling is constructed when the end of a single-part wire rope is bent back along the rope to create a looped eye shape, and strands at the end of this eye are then tucked back inside the body of the rope by hand. The eye shape helps to create a sling that can be used for a variety of applications. Our
Imbracatura della fune metallica di conduttore elettrico 4 di DNV 2.7-1
20 tonne DNV 2.7-1 Offshore Container Lifting Sling, four-leg swaged wire rope sling, sling assembly, lifting set DNV 2.7-1 Offshore Container Lifting Sling Set All of our DNV 2.7-1 Offshore Container Lifting Slings are produced according to our DNV Quality management approved system. When DNV revised the DNV 2.7-1 Certification Note, the most extensive changes were made in the lifting sling requirements. The sling is a four or five legged wire rope lifting sling fitted with
8 Assemblea di imbracatura del cavo metallico di tonnellata DNV 2.7-1, imbracatura della fune metallica di conduttore elettrico 4
8 tonne DNV 2.7-1 Offshore Container Lifting Sling, four-leg swaged wire rope sling, sling assembly, lifting set DNV 2.7-1 Offshore Container Lifting Sling Set Offshore Container are mainly used on offshore oil platforms. They are much different with normal ISO container. Not only because strict safety requirements have to be met, but also because they are mainly transported by small ship and lifted / unloaded by crane. When DNV revised the DNV 2.7-1 Certification Note, the
Assemblea di imbracatura del cavo metallico da 12 tonnellate
12 tonne DNV 2.7-1 Offshore Container Lifting Sling, four-leg swaged wire rope sling, sling assembly, lifting set DNV 2.7-1 Offshore Container Lifting Sling Set When DNV revised the DNV 2.7-1 Certification Note, the most extensive changes were made in the lifting sling requirements. The sling is a four or five legged wire rope lifting sling fitted with a quad assembly and shackles. Each component of the lifting sling is specified to the capacity of the container. The sling is
